Log in
Forgot password

Operating Hours: Tues: 5pm-9pm / Wed: CLOSED / Thurs-Sat: 10am-9pm / Sun: 10am-6pm / Mon: CLOSED

Most educational programs are in-person. We limit class sizes to make social distancing possible. In addition, we continue to offer virtual classes. Please browse our schedule below, with On-Site and Virtual programs listed separately.

MakerspaceCT is an 18+ facility, but we do run occasional youth programs. Unless an event specifically says it is for Youth, you must be 18+ to attend! We cannot make exceptions to this policy! Thank you.

Upcoming Workshops (On-Site)

  • [SOLD OUT] Intro to the Lathe with Jesse Marques - Slot 1

    • Saturday, April 27, 2024
    • 9:00 AM - 10:30 AM
    • 36 Talcott Street, Hartford, CT 06103
    • 0
    Join waitlist

    Cost: Members $69/ Non-members $89

    Age: 18+

    Prerequisites: N/A


    During this workshop, you will have a chance to make a wood-turned pen to take home!


    This is an introduction to the tools and techniques for wood turning on the lathe. Add this powerful tool to your repertoire to upgrade your making game! This course is open to everyone from novice makers first starting to veteran craftspeople looking to expand their skillset. 

    This workshop is one-on-one with the instructor.

    Lathe Safety: 

    • Safety Gear

    • Proper Use of Equipment

    Wood Preparation

    • Swapping out Bits

    • Choosing the Correct Bit

    Setup/Breakdown

    • Styles of Mounting

    • Choosing the Correct Chisel

    • Using a Parting Tool

    Skills:

    • Sanding

    • Finishing Technique

    • “Squaring”

    • Hollowing

    • Chisel Sharpening for the lathe

    Basic Information

    • Feeds and Speeds

    • Vocabulary and Parts of the Lathe

    • Types of wood

    • Toxic and do not turn materials (spaulding, wenge)

    • Best conditions for turning

    • Other turnable materials

    • Types of Tools

    • Calculations

    Other Content that may be covered:

    • Where to source materials

    • Locations of tools and batteries

    • Storage options at MCT


    About the Instructor: Jesse Marques makes and sells lathe-turned pens on his instagram. Check out his website to see some of his work.



    Show details

  • TIG Welding Basics with Mark

    • Saturday, April 27, 2024
    • 9:00 AM - 12:00 PM
    • 36 Talcott Street, Hartford, CT
    • 0

    Age: 18+

    Prerequisites: N/A

    Credentials: TIG Welding Safety


    Take the safety class to get access to the equipment of the TIG welding equipment of MakerspaceCT! TIG welding uses tungsten, inert gas and weld rods to produce precise and attractive welds in steel and aluminum.  Get started with the TIG welder, learn the basics of operation and some tips and tricks that will give you the best results. This is an essential skill for the budding maker.


    The course content includes:

    • Proper attire and safety
    • Basics of welding
    • Purpose of TIG welding
    • LOTS of hands-on practice


    Prior to the Class: Upon registration, you will be sent a prerequisite assignment to be completed online before attending the in-person workshop. All participants are requested to complete this assignment to prepare for the class.


    Dress Code: Wear natural fiber clothing, long pants, closed toed shoes (leather or natural fiber). No synthetic fabrics of any kind. Please don't wear loose fitting clothing that could get caught in machinery. Long hair must be tied back. MakerspaceCT provides welding jackets, gloves, masks and helmets with eye protection. Participants are welcome to bring their own PPE.

    Materials Included: A variety of metals to experiment on, as well as all machines, consumables, safety equipment, and accessories. 



    Show details

  • [SOLD OUT] Intro to the Lathe with Jesse Marques - Slot 2

    • Saturday, April 27, 2024
    • 11:00 AM - 12:30 PM
    • 36 Talcott Street, Hartford, CT 06103
    • 0
    Join waitlist

    Cost: Members $69/ Non-members $89

    Age: 18+

    Prerequisites: N/A


    During this workshop, you will have a chance to make a wood-turned pen to take home!


    This is an introduction to the tools and techniques for wood turning on the lathe. Add this powerful tool to your repertoire to upgrade your making game! This course is open to everyone from novice makers first starting to veteran craftspeople looking to expand their skillset. 

    This workshop is one-on-one with the instructor.

    Lathe Safety: 

    • Safety Gear

    • Proper Use of Equipment

    Wood Preparation

    • Swapping out Bits

    • Choosing the Correct Bit

    Setup/Breakdown

    • Styles of Mounting

    • Choosing the Correct Chisel

    • Using a Parting Tool

    Skills:

    • Sanding

    • Finishing Technique

    • “Squaring”

    • Hollowing

    • Chisel Sharpening for the lathe

    Basic Information

    • Feeds and Speeds

    • Vocabulary and Parts of the Lathe

    • Types of wood

    • Toxic and do not turn materials (spaulding, wenge)

    • Best conditions for turning

    • Other turnable materials

    • Types of Tools

    • Calculations

    Other Content that may be covered:

    • Where to source materials

    • Locations of tools and batteries

    • Storage options at MCT


    About the Instructor: Jesse Marques makes and sells lathe-turned pens on his instagram. Check out his website to see some of his work.



    Show details

  • Introduction to 3D Printing with Erik

    • Tuesday, April 30, 2024
    • 5:30 PM - 8:30 PM
    • Digital Fab Shop, 36 Talcott Street, Hartford, CT 06103
    • 3
    Register
    Show details

  • TIG Welding Basics with Mark

    • Saturday, May 04, 2024
    • 9:00 AM - 12:00 PM
    • 36 Talcott Street, Hartford, CT
    • 1
    Register

    Age: 18+

    Prerequisites: N/A

    Credentials: TIG Welding Safety


    Take the safety class to get access to the equipment of the TIG welding equipment of MakerspaceCT! TIG welding uses tungsten, inert gas and weld rods to produce precise and attractive welds in steel and aluminum.  Get started with the TIG welder, learn the basics of operation and some tips and tricks that will give you the best results. This is an essential skill for the budding maker.


    The course content includes:

    • Proper attire and safety
    • Basics of welding
    • Purpose of TIG welding
    • LOTS of hands-on practice


    Prior to the Class: Upon registration, you will be sent a prerequisite assignment to be completed online before attending the in-person workshop. All participants are requested to complete this assignment to prepare for the class.


    Dress Code: Wear natural fiber clothing, long pants, closed toed shoes (leather or natural fiber). No synthetic fabrics of any kind. Please don't wear loose fitting clothing that could get caught in machinery. Long hair must be tied back. MakerspaceCT provides welding jackets, gloves, masks and helmets with eye protection. Participants are welcome to bring their own PPE.

    Materials Included: A variety of metals to experiment on, as well as all machines, consumables, safety equipment, and accessories. 



    Show details

  • Intro to the Lathe with Jesse Marques - Slot 1

    • Wednesday, May 08, 2024
    • 3:00 PM - 4:30 PM
    • 36 Talcott Street, Hartford, CT 06103
    • 1
    Register

    Cost: Members $69/ Non-members $89

    Age: 18+

    Prerequisites: N/A


    During this workshop, you will have a chance to make a wood-turned pen to take home!


    This is an introduction to the tools and techniques for wood turning on the lathe. Add this powerful tool to your repertoire to upgrade your making game! This course is open to everyone from novice makers first starting to veteran craftspeople looking to expand their skillset. 

    This workshop is one-on-one with the instructor.

    Lathe Safety: 

    • Safety Gear

    • Proper Use of Equipment

    Wood Preparation

    • Swapping out Bits

    • Choosing the Correct Bit

    Setup/Breakdown

    • Styles of Mounting

    • Choosing the Correct Chisel

    • Using a Parting Tool

    Skills:

    • Sanding

    • Finishing Technique

    • “Squaring”

    • Hollowing

    • Chisel Sharpening for the lathe

    Basic Information

    • Feeds and Speeds

    • Vocabulary and Parts of the Lathe

    • Types of wood

    • Toxic and do not turn materials (spaulding, wenge)

    • Best conditions for turning

    • Other turnable materials

    • Types of Tools

    • Calculations

    Other Content that may be covered:

    • Where to source materials

    • Locations of tools and batteries

    • Storage options at MCT


    About the Instructor: Jesse Marques makes and sells lathe-turned pens on his instagram. Check out his website to see some of his work.



    Show details

  • [SOLD OUT] Intro to the Lathe with Jesse Marques - Slot 2

    • Wednesday, May 08, 2024
    • 5:00 PM - 6:30 PM
    • 36 Talcott Street, Hartford, CT 06103
    • 0
    Join waitlist

    Cost: Members $69/ Non-members $89

    Age: 18+

    Prerequisites: N/A


    During this workshop, you will have a chance to make a wood-turned pen to take home!


    This is an introduction to the tools and techniques for wood turning on the lathe. Add this powerful tool to your repertoire to upgrade your making game! This course is open to everyone from novice makers first starting to veteran craftspeople looking to expand their skillset. 

    This workshop is one-on-one with the instructor.

    Lathe Safety: 

    • Safety Gear

    • Proper Use of Equipment

    Wood Preparation

    • Swapping out Bits

    • Choosing the Correct Bit

    Setup/Breakdown

    • Styles of Mounting

    • Choosing the Correct Chisel

    • Using a Parting Tool

    Skills:

    • Sanding

    • Finishing Technique

    • “Squaring”

    • Hollowing

    • Chisel Sharpening for the lathe

    Basic Information

    • Feeds and Speeds

    • Vocabulary and Parts of the Lathe

    • Types of wood

    • Toxic and do not turn materials (spaulding, wenge)

    • Best conditions for turning

    • Other turnable materials

    • Types of Tools

    • Calculations

    Other Content that may be covered:

    • Where to source materials

    • Locations of tools and batteries

    • Storage options at MCT


    About the Instructor: Jesse Marques makes and sells lathe-turned pens on his instagram. Check out his website to see some of his work.



    Show details

  • Intro to the Lathe with Jesse Marques - Slot 3

    • Wednesday, May 08, 2024
    • 7:00 PM - 8:30 PM
    • 36 Talcott Street, Hartford, CT 06103
    • 0
    Join waitlist

    Cost: Members $69/ Non-members $89

    Age: 18+

    Prerequisites: N/A


    During this workshop, you will have a chance to make a wood-turned pen to take home!


    This is an introduction to the tools and techniques for wood turning on the lathe. Add this powerful tool to your repertoire to upgrade your making game! This course is open to everyone from novice makers first starting to veteran craftspeople looking to expand their skillset. 

    This workshop is one-on-one with the instructor.

    Lathe Safety: 

    • Safety Gear

    • Proper Use of Equipment

    Wood Preparation

    • Swapping out Bits

    • Choosing the Correct Bit

    Setup/Breakdown

    • Styles of Mounting

    • Choosing the Correct Chisel

    • Using a Parting Tool

    Skills:

    • Sanding

    • Finishing Technique

    • “Squaring”

    • Hollowing

    • Chisel Sharpening for the lathe

    Basic Information

    • Feeds and Speeds

    • Vocabulary and Parts of the Lathe

    • Types of wood

    • Toxic and do not turn materials (spaulding, wenge)

    • Best conditions for turning

    • Other turnable materials

    • Types of Tools

    • Calculations

    Other Content that may be covered:

    • Where to source materials

    • Locations of tools and batteries

    • Storage options at MCT


    About the Instructor: Jesse Marques makes and sells lathe-turned pens on his instagram. Check out his website to see some of his work.



    Show details

  • Laser Basics with Julie

    • Friday, May 10, 2024
    • 5:30 PM - 7:30 PM
    • Digital Fab Shop, 36 Talcott Street, Hartford, CT 06103
    • 5
    Register

    Cost: Members $59/Non-members $79

    Age: 18+

    Prerequisites: N/A

    Credentials: Laser Cutter Safety

    Recommended Follow Up Classes: Inkscape for CNC, Plasma Cutter, Intro to Wood Shop


    Laser engraving is a fun and interesting skill that can range from an enjoyable hobby to a lucrative business opportunity. Engraving can be used to personalize everyday objects, such as coasters, keychains, and barware. Lasers can even cut materials with details that are impossible for other tools! This is the perfect launching point into larger CNC operations, such as the plasma cutter or the techno router table. This is the perfect course for dipping your toes into the world of CNC machines!

    The course content includes:

    • Startup Procedure
    • Overview of what CAD is
    • Overview of what CAM is
    • Quick overview of what gcode is
    • How the laser cutter functions
    • How to prep a file for the laser cutter
    • Cutting versus engraving and vector versus raster
    • What materials can be cut
    • Tolerances
    • Kerf of the cut
    • Power and Speeds calculations
    • Troubleshooting
    • Where to source materials

    Materials Included: A variety of acrylic, plywood, and paper to experiment on, as well as all machines, consumables, and accessories. Participants are welcome to bring their own supplies to cut! Be aware that several types of plastics are not safe to cut on the laser, so ensure that you know exactly what material you are bringing.


    All people are welcome in this class and an active effort will be made to be inclusive to all people. This class will not tolerate sexism, ableism, racism, homophobia, or transphobia. MakerspaceCT is for everyone.

    Show details

  • Introduction to 3D Printing with Erik

    • Tuesday, May 14, 2024
    • 5:30 PM - 8:30 PM
    • Digital Fab Shop, 36 Talcott Street, Hartford, CT 06103
    • 4
    Register
    Show details

  • Textiles Safety Certification with Lita

    • Thursday, May 16, 2024
    • 6:00 PM - 7:00 PM
    • Textiles Shop, MakerspaceCT, 36 Talcott Street, Hartford, CT 06103
    • 3
    Register
    Show details

  • TIG Welding Basics with Mark

    • Saturday, May 25, 2024
    • 9:00 AM - 12:00 PM
    • 36 Talcott Street, Hartford, CT
    • 2
    Register

    Age: 18+

    Prerequisites: N/A

    Credentials: TIG Welding Safety


    Take the safety class to get access to the equipment of the TIG welding equipment of MakerspaceCT! TIG welding uses tungsten, inert gas and weld rods to produce precise and attractive welds in steel and aluminum.  Get started with the TIG welder, learn the basics of operation and some tips and tricks that will give you the best results. This is an essential skill for the budding maker.


    The course content includes:

    • Proper attire and safety
    • Basics of welding
    • Purpose of TIG welding
    • LOTS of hands-on practice


    Prior to the Class: Upon registration, you will be sent a prerequisite assignment to be completed online before attending the in-person workshop. All participants are requested to complete this assignment to prepare for the class.


    Dress Code: Wear natural fiber clothing, long pants, closed toed shoes (leather or natural fiber). No synthetic fabrics of any kind. Please don't wear loose fitting clothing that could get caught in machinery. Long hair must be tied back. MakerspaceCT provides welding jackets, gloves, masks and helmets with eye protection. Participants are welcome to bring their own PPE.

    Materials Included: A variety of metals to experiment on, as well as all machines, consumables, safety equipment, and accessories. 



    Show details

  • Introduction to 3D Printing with Erik

    • Tuesday, May 28, 2024
    • 5:30 PM - 8:30 PM
    • Digital Fab Shop, 36 Talcott Street, Hartford, CT 06103
    • 4
    Register
    Show details

  • Laser Basics with Julie

    • Friday, May 31, 2024
    • 5:30 PM - 7:30 PM
    • Digital Fab Shop, 36 Talcott Street, Hartford, CT 06103
    • 4
    Register

    Cost: Members $59/Non-members $79

    Age: 18+

    Prerequisites: N/A

    Credentials: Laser Cutter Safety

    Recommended Follow Up Classes: Inkscape for CNC, Plasma Cutter, Intro to Wood Shop


    Laser engraving is a fun and interesting skill that can range from an enjoyable hobby to a lucrative business opportunity. Engraving can be used to personalize everyday objects, such as coasters, keychains, and barware. Lasers can even cut materials with details that are impossible for other tools! This is the perfect launching point into larger CNC operations, such as the plasma cutter or the techno router table. This is the perfect course for dipping your toes into the world of CNC machines!

    The course content includes:

    • Startup Procedure
    • Overview of what CAD is
    • Overview of what CAM is
    • Quick overview of what gcode is
    • How the laser cutter functions
    • How to prep a file for the laser cutter
    • Cutting versus engraving and vector versus raster
    • What materials can be cut
    • Tolerances
    • Kerf of the cut
    • Power and Speeds calculations
    • Troubleshooting
    • Where to source materials

    Materials Included: A variety of acrylic, plywood, and paper to experiment on, as well as all machines, consumables, and accessories. Participants are welcome to bring their own supplies to cut! Be aware that several types of plastics are not safe to cut on the laser, so ensure that you know exactly what material you are bringing.


    All people are welcome in this class and an active effort will be made to be inclusive to all people. This class will not tolerate sexism, ableism, racism, homophobia, or transphobia. MakerspaceCT is for everyone.

    Show details

  • Introduction to 3D Printing with Erik

    • Tuesday, June 04, 2024
    • 5:30 PM - 8:30 PM
    • Digital Fab Shop, 36 Talcott Street, Hartford, CT 06103
    • 4
    Register
    Show details

  • Intro to MIG Welding with Mark

    • Saturday, June 08, 2024
    • 9:00 AM - 12:00 PM
    • 36 Talcott Street, Hartford CT 06103
    • 3
    Register

    Cost: Members $135/Non-members $159

    Age: 18+

    Prerequisites: N/A

    Credentials: MIG Welding Safety

    Recommended Follow up Classes: TIG Welding, Plasma Cutter


    Get a step-by-step intro into fusing metals with MIG and stick welders. Learn the basics of operation and some tips and tricks that will give you the best results. This is an essential skill for the budding maker.


    The course content includes:

    • Proper attire and safety
    • Basics of welding
    • Purpose of MIG welding
    • LOTS of hands-on practice


    Prior to the Class: Upon registration, you will be sent a prerequisite assignment to be completed online before attending the in-person workshop. All participants are requested to complete this assignment to prepare for the class.


    Materials Included: A variety of metals to experiment on, as well as all machines, consumables, safety equipment, and accessories. Participants are welcome to bring their own supplies!


    PLEASE NOTE! Welding is close, detailed work. If you need corrective lenses to see close objects, such as reading glasses or bifocals, please bring them.



    Show details

  • TIG Welding Basics with Mark

    • Saturday, June 15, 2024
    • 9:00 AM - 12:00 PM
    • 36 Talcott Street, Hartford, CT
    • 3
    Register

    Age: 18+

    Prerequisites: N/A

    Credentials: TIG Welding Safety


    Take the safety class to get access to the equipment of the TIG welding equipment of MakerspaceCT! TIG welding uses tungsten, inert gas and weld rods to produce precise and attractive welds in steel and aluminum.  Get started with the TIG welder, learn the basics of operation and some tips and tricks that will give you the best results. This is an essential skill for the budding maker.


    The course content includes:

    • Proper attire and safety
    • Basics of welding
    • Purpose of TIG welding
    • LOTS of hands-on practice


    Prior to the Class: Upon registration, you will be sent a prerequisite assignment to be completed online before attending the in-person workshop. All participants are requested to complete this assignment to prepare for the class.


    Dress Code: Wear natural fiber clothing, long pants, closed toed shoes (leather or natural fiber). No synthetic fabrics of any kind. Please don't wear loose fitting clothing that could get caught in machinery. Long hair must be tied back. MakerspaceCT provides welding jackets, gloves, masks and helmets with eye protection. Participants are welcome to bring their own PPE.

    Materials Included: A variety of metals to experiment on, as well as all machines, consumables, safety equipment, and accessories. 



    Show details

  • Introduction to 3D Printing with Erik

    • Tuesday, June 18, 2024
    • 5:30 PM - 8:30 PM
    • Digital Fab Shop, 36 Talcott Street, Hartford, CT 06103
    • 4
    Register
    Show details

  • Textiles Safety Certification with Lita

    • Thursday, June 20, 2024
    • 6:00 PM - 7:00 PM
    • Textiles Shop, MakerspaceCT, 36 Talcott Street, Hartford, CT 06103
    • 3
    Register
    Show details

  • Intro to MIG Welding with Mark

    • Saturday, June 22, 2024
    • 9:00 AM - 12:00 PM
    • 36 Talcott Street, Hartford CT 06103
    • 4
    Register

    Cost: Members $135/Non-members $159

    Age: 18+

    Prerequisites: N/A

    Credentials: MIG Welding Safety

    Recommended Follow up Classes: TIG Welding, Plasma Cutter


    Get a step-by-step intro into fusing metals with MIG and stick welders. Learn the basics of operation and some tips and tricks that will give you the best results. This is an essential skill for the budding maker.


    The course content includes:

    • Proper attire and safety
    • Basics of welding
    • Purpose of MIG welding
    • LOTS of hands-on practice


    Prior to the Class: Upon registration, you will be sent a prerequisite assignment to be completed online before attending the in-person workshop. All participants are requested to complete this assignment to prepare for the class.


    Materials Included: A variety of metals to experiment on, as well as all machines, consumables, safety equipment, and accessories. Participants are welcome to bring their own supplies!


    PLEASE NOTE! Welding is close, detailed work. If you need corrective lenses to see close objects, such as reading glasses or bifocals, please bring them.



    Show details

  • Intro to MIG Welding with Mark

    • Saturday, July 13, 2024
    • 9:00 AM - 12:00 PM
    • 36 Talcott Street, Hartford CT 06103
    • 4
    Register

    Cost: Members $135/Non-members $159

    Age: 18+

    Prerequisites: N/A

    Credentials: MIG Welding Safety

    Recommended Follow up Classes: TIG Welding, Plasma Cutter


    Get a step-by-step intro into fusing metals with MIG and stick welders. Learn the basics of operation and some tips and tricks that will give you the best results. This is an essential skill for the budding maker.


    The course content includes:

    • Proper attire and safety
    • Basics of welding
    • Purpose of MIG welding
    • LOTS of hands-on practice


    Prior to the Class: Upon registration, you will be sent a prerequisite assignment to be completed online before attending the in-person workshop. All participants are requested to complete this assignment to prepare for the class.


    Materials Included: A variety of metals to experiment on, as well as all machines, consumables, safety equipment, and accessories. Participants are welcome to bring their own supplies!


    PLEASE NOTE! Welding is close, detailed work. If you need corrective lenses to see close objects, such as reading glasses or bifocals, please bring them.



    Show details

  • Textiles Safety Certification with Lita

    • Thursday, July 18, 2024
    • 6:00 PM - 7:00 PM
    • Textiles Shop, MakerspaceCT, 36 Talcott Street, Hartford, CT 06103
    • 3
    Register
    Show details

  • TIG Welding Basics with Mark

    • Saturday, July 27, 2024
    • 9:00 AM - 12:00 PM
    • 36 Talcott Street, Hartford, CT
    • 3
    Register

    Age: 18+

    Prerequisites: N/A

    Credentials: TIG Welding Safety


    Take the safety class to get access to the equipment of the TIG welding equipment of MakerspaceCT! TIG welding uses tungsten, inert gas and weld rods to produce precise and attractive welds in steel and aluminum.  Get started with the TIG welder, learn the basics of operation and some tips and tricks that will give you the best results. This is an essential skill for the budding maker.


    The course content includes:

    • Proper attire and safety
    • Basics of welding
    • Purpose of TIG welding
    • LOTS of hands-on practice


    Prior to the Class: Upon registration, you will be sent a prerequisite assignment to be completed online before attending the in-person workshop. All participants are requested to complete this assignment to prepare for the class.


    Dress Code: Wear natural fiber clothing, long pants, closed toed shoes (leather or natural fiber). No synthetic fabrics of any kind. Please don't wear loose fitting clothing that could get caught in machinery. Long hair must be tied back. MakerspaceCT provides welding jackets, gloves, masks and helmets with eye protection. Participants are welcome to bring their own PPE.

    Materials Included: A variety of metals to experiment on, as well as all machines, consumables, safety equipment, and accessories. 



    Show details

Past events

Thursday, April 25, 2024 Textiles Safety Certification with Lita
Thursday, April 25, 2024 Resin 3D Printing Certification
Wednesday, April 24, 2024 MIG Welding Steel Rose - Project Class
Saturday, April 20, 2024 TIG Welding Basics with Mark
Wednesday, April 10, 2024 Crafting E-Commerce Success
Wednesday, April 10, 2024 Intro to MIG Welding with Mairead
Wednesday, April 10, 2024 Skateboard Deck Building
Tuesday, April 09, 2024 Open Sew with Rebecca
Wednesday, April 03, 2024 Laser Cutter Lamp - Project Class (Prerequisite Required)
Saturday, March 30, 2024 Intro to MIG Welding with Mark
Friday, March 29, 2024 Laser Basics with Julie
Thursday, March 28, 2024 Textiles Safety Certification with Lita
Thursday, March 28, 2024 Introduction to 3D Printing with Erik
Wednesday, March 27, 2024 Introduction to Blacksmithing with Mike
Monday, March 25, 2024 Intro to MIG Welding with Mairead
Saturday, March 23, 2024 TIG Welding Basics with Patrick
Thursday, March 21, 2024 Resin 3D Printing Certification
Wednesday, March 20, 2024 Crafting E-Commerce Success
Tuesday, March 19, 2024 CNC Plasma Cutting Basics with Mike
Tuesday, March 19, 2024 Open Sew with Rebecca
Monday, March 18, 2024 Intro to MIG Welding with Mairead
Saturday, March 16, 2024 [SOLD OUT] Intro to the Lathe with Jesse Marques - Slot 3
Saturday, March 16, 2024 [SOLD OUT] Intro to the Lathe with Jesse Marques - Slot 2
Saturday, March 16, 2024 [SOLD OUT] Intro to the Lathe with Jesse Marques - Slot 1
Friday, March 15, 2024 Laser Basics with Julie
Thursday, March 14, 2024 Textiles Safety Certification with Lita
Wednesday, March 13, 2024 MIG Welding Steel Rose - Project Class
Wednesday, March 13, 2024 Skateboard Deck Building
Tuesday, March 12, 2024 Open Sew with Rebecca
Monday, March 11, 2024 Intro to MIG Welding with Mairead
Saturday, March 09, 2024 TIG Welding Basics with Patrick
Friday, March 08, 2024 Laser Cutter Lamp - Project Class (Prerequisite Required)
Thursday, March 07, 2024 Textiles Safety Certification with Lita
Wednesday, March 06, 2024 Enough Python to Get Started (Coding)
Tuesday, March 05, 2024 Build A Birdhouse with Hand Tools Only
Monday, March 04, 2024 Intro to MIG Welding with Mairead
Saturday, March 02, 2024 TIG Welding Basics with Patrick
Friday, March 01, 2024 Laser Basics with Julie
Thursday, February 29, 2024 Textiles Safety Certification with Lita
Thursday, February 29, 2024 Innovation Bytes: Member Potluck + Conversation
Wednesday, February 28, 2024 Introduction to 3D Printing with Erik
Monday, February 26, 2024 Intro to MIG Welding with Mairead
Saturday, February 24, 2024 TIG Welding Basics with Patrick
Thursday, February 22, 2024 Crafting E-Commerce Success
Thursday, February 22, 2024 Resin 3D Printing Certification
Tuesday, February 20, 2024 Open Sew with Rebecca
Monday, February 19, 2024 Intro to MIG Welding with Mairead
Saturday, February 17, 2024 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, February 17, 2024 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, February 17, 2024 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, February 17, 2024 TIG Welding Basics with Patrick
Thursday, February 15, 2024 [SOLD OUT] Intro to MIG Welding with Mairead
Wednesday, February 14, 2024 Skateboard Deck Building
Tuesday, February 13, 2024 Open Sew with Rebecca
Monday, February 12, 2024 MIG Welding Steel Rose - Project Class
Saturday, February 10, 2024 Intro to MIG Welding with Mark
Wednesday, February 07, 2024 CNC Plasma Cutting Basics with Mike
Tuesday, February 06, 2024 Intro to Wood CNC with Mike
Friday, February 02, 2024 Laser Basics with Julie
Thursday, February 01, 2024 Textiles Safety Certification with Lita
Thursday, February 01, 2024 Introduction to 3D Printing with Erik
Wednesday, January 31, 2024 Introduction to Blacksmithing with Mike
Tuesday, January 30, 2024 New Year Open House
Saturday, January 27, 2024 TIG Welding Basics with Mark
Friday, January 26, 2024 Laser Basics with Julie
Thursday, January 25, 2024 Resin 3D Printing Certification
Wednesday, January 24, 2024 Intro to MIG Welding with Mairead
Tuesday, January 23, 2024 Open Sew with Rebecca
Tuesday, January 23, 2024 3D Printing Certification (Members Only)
Saturday, January 20, 2024 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, January 20, 2024 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, January 20, 2024 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, January 20, 2024 Intro to MIG Welding with Mark
Friday, January 19, 2024 Crafting E-Commerce Success
Thursday, January 18, 2024 Textiles Safety Certification with Lita
Thursday, January 18, 2024 Textiles Safety Certification with Lita
Saturday, January 13, 2024 TIG Welding Basics with Mark
Wednesday, January 10, 2024 Intro to MIG Welding with Mairead
Tuesday, January 09, 2024 3D Printing Certification (Members Only)
Saturday, January 06, 2024 TIG Welding Basics with Mark
Friday, January 05, 2024 Laser Basics with Julie
Thursday, January 04, 2024 Resin 3D Printing Certification
Wednesday, December 27, 2023 Intro to MIG Welding with Mairead
Thursday, December 21, 2023 Textiles Safety Certification with Lita
Tuesday, December 19, 2023 Open Sew with Rebecca
Saturday, December 16, 2023 Intro to MIG Welding with Mark
Thursday, December 14, 2023 Cookie Party
Wednesday, December 13, 2023 Introduction to Blacksmithing with Mike
Tuesday, December 12, 2023 Open Sew with Rebecca
Tuesday, December 12, 2023 3D Printing Certification (Members Only)
Saturday, December 09, 2023 TIG Welding Basics with Mark
Friday, December 08, 2023 Laser Basics with Julie
Friday, December 08, 2023 Intro to MIG Welding with Mairead
Thursday, December 07, 2023 Textiles Safety Certification with Lita
Thursday, December 07, 2023 Resin 3D Printing Certification
Tuesday, December 05, 2023 Intro to Wood CNC with Mike
Saturday, December 02, 2023 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, December 02, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, December 02, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, December 02, 2023 TIG Welding Basics with Mark
Tuesday, November 21, 2023 Open Sew with Rebecca
Tuesday, November 21, 2023 3D Printing Certification (Members Only)
Friday, November 17, 2023 Leveraging Artificial Intelligence Tools for Productivity
Friday, November 17, 2023 Intro to MIG Welding with Mairead
Wednesday, November 15, 2023 Introduction to Blacksmithing with Mike
Tuesday, November 14, 2023 Open Sew with Rebecca
Tuesday, November 14, 2023 Innovation Bytes: Member Potluck + Conversation
Saturday, November 11, 2023 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, November 11, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, November 11, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Friday, November 10, 2023 Laser Basics with Julie
Thursday, November 09, 2023 Resin 3D Printing Certification
Wednesday, November 08, 2023 Intro to MIG Welding with Mairead
Tuesday, November 07, 2023 3D Printing Certification (Members Only)
Saturday, October 28, 2023 TIG Welding Basics with Mark
Thursday, October 26, 2023 Textiles Safety Certification with Lita
Thursday, October 26, 2023 Laser Basics with Julie
Wednesday, October 25, 2023 Intro to MIG Welding with Mairead
Tuesday, October 24, 2023 Intro to Wood CNC with Mike
Saturday, October 21, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, October 21, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, October 21, 2023 TIG Welding Basics with Mark
Wednesday, October 18, 2023 Introduction to Blacksmithing with Mike
Wednesday, October 18, 2023 Intro to MIG Welding with Mairead
Thursday, October 12, 2023 Laser Basics with Julie
Wednesday, October 11, 2023 Intro to MIG Welding with Mairead
Tuesday, October 10, 2023 CNC Plasma Cutting Basics with Mike
Tuesday, October 10, 2023 Open Sew with Rebecca
Saturday, October 07, 2023 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, October 07, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, October 07, 2023 Intro to MIG Welding with Mark
Saturday, October 07, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Wednesday, October 04, 2023 Introduction to Blacksmithing with Mike
Friday, September 29, 2023 Leveraging Artificial Intelligence Tools for Productivity
Wednesday, September 27, 2023 Skateboard Deck Building - MEMBERS ONLY
Wednesday, September 27, 2023 Learn To Solder with Konstantinos
Wednesday, September 27, 2023 [CANCELED] Introduction to Blacksmithing with Mike
Tuesday, September 26, 2023 Intro to Wood CNC with Mike
Tuesday, September 26, 2023 Laser Basics with Julie
Tuesday, September 26, 2023 Resin 3D Printing Certification
Monday, September 25, 2023 3D Printing Certification (Members Only)
Saturday, September 23, 2023 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, September 23, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, September 23, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, September 23, 2023 TIG Welding Basics with Mark
Thursday, September 21, 2023 Textiles Safety Certification with Lita
Tuesday, September 19, 2023 Open Sew with Rebecca
Saturday, September 16, 2023 Intro to MIG Welding with Mark
Thursday, September 14, 2023 3D Printing Certification (Members Only)
Wednesday, September 13, 2023 Intro to MIG Welding with Mairead
Tuesday, September 12, 2023 Laser Basics with Julie
Saturday, September 09, 2023 Intro to MIG Welding with Mairead
Wednesday, September 06, 2023 Introduction to Blacksmithing with Mike
Thursday, August 31, 2023 Textiles Safety Certification with Lita
Thursday, August 31, 2023 Textiles Safety Certification with Lita
Thursday, August 31, 2023 Innovation Bytes: Member Potluck + Conversation
Wednesday, August 30, 2023 Learn To Solder with Konstantinos
Wednesday, August 30, 2023 Metal Shop Safety Certification with Mairead (Members Only)
Tuesday, August 29, 2023 Intro to Wood CNC with Mike
Saturday, August 26, 2023 Intro to MIG Welding with Mark
Tuesday, August 22, 2023 Open Sew with Rebecca
Saturday, August 19, 2023 TIG Welding Basics with Mark
Thursday, August 17, 2023 Laser Basics with Julie
Tuesday, August 15, 2023 CNC Plasma Cutting Basics with Mike
Tuesday, August 08, 2023 Open Sew with Rebecca
Saturday, August 05, 2023 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, August 05, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, August 05, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, July 29, 2023 Intro to MIG Welding with Mark
Thursday, July 27, 2023 Textiles Safety Certification with Lita
Wednesday, July 26, 2023 Introduction to Blacksmithing with Mike
Saturday, July 22, 2023 TIG Welding Basics with Mark
Thursday, July 20, 2023 Innovation Bytes: Member Potluck + Conversation
Wednesday, July 19, 2023 3D Printing Certification (Members Only)
Wednesday, July 19, 2023 Intro to MIG Welding with Mairead
Tuesday, July 18, 2023 Open Sew with Rebecca
Saturday, July 15, 2023 Intro to MIG Welding with Mark
Thursday, July 13, 2023 Laser Basics with Julie
Tuesday, July 11, 2023 Open Sew with Rebecca
Saturday, July 08, 2023 TIG Welding Basics with Mark
Thursday, June 29, 2023 Textiles Safety Certification with Lita
Wednesday, June 28, 2023 Introduction to Blacksmithing with Mike
Saturday, June 24, 2023 TIG Welding Basics with Mark
Thursday, June 22, 2023 Laser Basics with Julie
Thursday, June 22, 2023 Innovation Bytes: Member Potluck + Conversation
Wednesday, June 21, 2023 Intro to MIG Welding with Mairead
Tuesday, June 20, 2023 Open Sew with Rebecca
Saturday, June 17, 2023 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, June 17, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, June 17, 2023 3D Printing Certification (Members Only)
Saturday, June 17, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, June 17, 2023 Intro to MIG Welding with Mark
Tuesday, June 13, 2023 Open Sew with Rebecca
Saturday, June 10, 2023 TIG Welding Basics with Mark
Thursday, June 08, 2023 Laser Basics with Julie
Wednesday, June 07, 2023 Intro to MIG Welding with Mairead
Saturday, June 03, 2023 TIG Welding Basics with Mark
Thursday, June 01, 2023 3D Printing Certification (Members Only)
Wednesday, May 31, 2023 Introduction to Blacksmithing with Mike
Saturday, May 27, 2023 Intro to MIG Welding with Mark
Saturday, May 20, 2023 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, May 20, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, May 20, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, May 20, 2023 TIG Welding Basics with Mark
Thursday, May 18, 2023 3D Printing Certification (Members Only)
Wednesday, May 17, 2023 Intro to MIG Welding with Mairead
Tuesday, May 16, 2023 Open Sew with Rebecca
Saturday, May 13, 2023 TIG Welding Basics with Mark
Tuesday, May 09, 2023 Open Sew with Rebecca
Saturday, May 06, 2023 CAD Basics with Onshape
Saturday, May 06, 2023 Intro to MIG Welding with Mark
Tuesday, May 02, 2023 Sewing Basics with Rebecca
Saturday, April 22, 2023 Intro to MIG Welding with Mark
Tuesday, April 18, 2023 Open Sew with Rebecca
Saturday, April 15, 2023 TIG Welding Basics with Mark
Tuesday, April 11, 2023 Open Sew with Rebecca
Tuesday, April 11, 2023 Introduction to Mastercam Programming and CNC Machining
Saturday, April 08, 2023 Intro to MIG Welding with Mark
Wednesday, April 05, 2023 TIG Welding Basics with Mark
Tuesday, April 04, 2023 Sewing Basics with Rebecca
Saturday, April 01, 2023 Intro to the Lathe with Jesse Marques - Slot 3
Saturday, April 01, 2023 Intro to the Lathe with Jesse Marques - Slot 2
Saturday, April 01, 2023 Intro to the Lathe with Jesse Marques - Slot 1
Saturday, April 01, 2023 TIG Welding Basics with Mark
Thursday, March 30, 2023 Textiles Safety Certification with Lita
Wednesday, March 22, 2023 Intro to MIG Welding with Mark
Tuesday, March 21, 2023 Laser Basics with Julie
Saturday, March 18, 2023 TIG Welding Basics with Mark
Thursday, March 09, 2023 Textiles Safety Certification with Lita
Wednesday, March 08, 2023 Intro to MIG Welding with Mark
Thursday, March 02, 2023 Laser Basics with Julie
Wednesday, March 01, 2023 Introduction to Blacksmithing with Mike
Tuesday, February 28, 2023 Open Sew with Rebecca
Friday, February 24, 2023 Make An Edge Grain Cutting Board
Tuesday, February 21, 2023 Open Sew with Rebecca
Saturday, February 18, 2023 Laser Cutting for Paper Folding with Ben
Saturday, February 18, 2023 TIG Welding Basics with Mark
Thursday, February 16, 2023 3D Printing Basics: Slicing, Printing and Protocol
Saturday, February 11, 2023 Intro to Wood CNC with Alexis
Thursday, February 09, 2023 Textiles Safety Certification with Lita
Wednesday, February 08, 2023 Intro to MIG Welding with David
Tuesday, February 07, 2023 Laser Basics with Julie
Tuesday, February 07, 2023 Sewing Basics with Rebecca
Wednesday, February 01, 2023 Introduction to Blacksmithing with Mike
Wednesday, February 01, 2023 Intro to MIG Welding with David
Thursday, January 19, 2023 Make An Edge Grain Cutting Board with Alexis
Wednesday, January 18, 2023 Introduction to Blacksmithing with Mike
Wednesday, January 18, 2023 Intro to MIG Welding with David
Thursday, January 12, 2023 Laser Basics with Alexis
Thursday, January 12, 2023 Textiles Safety Certification with Lita
Tuesday, January 10, 2023 Open Sew with Rebecca
Tuesday, January 03, 2023 Sewing Basics with Rebecca
Saturday, December 17, 2022 TIG Welding Basics with Mark
Wednesday, December 14, 2022 Intro to MIG Welding with David
Tuesday, December 13, 2022 Open Sew with Rebecca
Saturday, December 10, 2022 Intro to Wood CNC with Alexis
Thursday, December 08, 2022 Textiles Safety Certification with Lita
Wednesday, December 07, 2022 Intro to MIG Welding with David
Saturday, December 03, 2022 TIG Welding Basics with Mark
Thursday, December 01, 2022 Laser Basics with Julie
Saturday, November 19, 2022 Intro to Wood CNC with Alexis
Wednesday, November 16, 2022 Intro to MIG Welding with David
Saturday, November 12, 2022 TIG Welding Basics with Mark
Thursday, November 03, 2022 CNC Plasma Cutting Basics with Mike
Tuesday, November 01, 2022 Laser Basics with Julie
Saturday, October 29, 2022 TIG Welding Basics with Mark
Saturday, October 22, 2022 TIG Welding Basics with Mark
Saturday, October 15, 2022 TIG Welding Basics with Mark
Saturday, October 01, 2022 TIG Welding Basics with Mark
Saturday, September 17, 2022 TIG Welding Basics with Mark
Saturday, August 27, 2022 TIG Welding Basics with Mark
Saturday, August 20, 2022 TIG Welding Basics with Mark
Saturday, August 06, 2022 TIG Welding Basics with Mark
Saturday, July 23, 2022 TIG Welding Basics with Mark
Wednesday, June 29, 2022 Intro to MIG Welding with Sabrina
Tuesday, June 28, 2022 TIG Welding Basics with Sabrina
Wednesday, June 22, 2022 Intro to MIG Welding with Sabrina
Tuesday, June 21, 2022 Open Sew with Rebecca
Tuesday, June 21, 2022 TIG Welding Basics with Sabrina
Saturday, June 18, 2022 Intro to Wood Shop with Dan Ruby
Wednesday, June 15, 2022 Intro to MIG Welding with Sabrina
Tuesday, June 14, 2022 Open Sew with Rebecca
Tuesday, June 14, 2022 TIG Welding Basics with Sabrina
Tuesday, June 07, 2022 Sewing Basics with Rebecca
Tuesday, June 07, 2022 Additive Manufacturing - Prusa i3 MK3S with John Harris
Thursday, June 02, 2022 Introduction to CNC Milling with Austin
Wednesday, June 01, 2022 Intro to MIG Welding with Sabrina
Tuesday, May 31, 2022 TIG Welding Basics with Sabrina
Wednesday, May 25, 2022 Laser Basics with Pat
Wednesday, May 25, 2022 Intro to MIG Welding with Sabrina
Thursday, May 19, 2022 Additive Manufacturing - Prusa i3 MK3S with John Harris
Wednesday, May 18, 2022 Intro to MIG Welding with Sabrina
Tuesday, May 17, 2022 Open Sew with Rebecca
Thursday, May 12, 2022 CNC Plasma Cutting Basics with Mike
Wednesday, May 11, 2022 Techno Titan CNC Router Safety Certification with Pat
Wednesday, May 11, 2022 Intro to MIG Welding with Sabrina
Tuesday, May 10, 2022 Open Sew with Rebecca
Tuesday, May 10, 2022 TIG Welding Basics with Sabrina
Saturday, May 07, 2022 TIG Welding Basics with Mark
Thursday, May 05, 2022 Make An Edge Grain Cutting Board with Alexis
Wednesday, May 04, 2022 Intro to MIG Welding with Sabrina
Tuesday, May 03, 2022 Sewing Basics with Rebecca
Tuesday, May 03, 2022 TIG Welding Basics with Sabrina
Saturday, April 30, 2022 TIG Welding Basics with Mark
Wednesday, April 27, 2022 Intro to MIG Welding with Sabrina
Friday, April 22, 2022 Introduction to Blacksmithing with Mike
Wednesday, April 20, 2022 Laser Basics with Pat
Tuesday, April 19, 2022 Open Sew with Rebecca
Tuesday, April 19, 2022 TIG Welding Basics with Sabrina
Friday, April 15, 2022 Introduction to CNC Milling with Austin
Wednesday, April 13, 2022 Intro to MIG Welding with Sabrina
Tuesday, April 12, 2022 Open Sew with Rebecca
Tuesday, April 12, 2022 TIG Welding Basics with Dave
Tuesday, April 12, 2022 Additive Manufacturing - Prusa i3 MK3S with John Harris
Saturday, April 09, 2022 CNC Plasma Cutting Basics with Mike
Thursday, April 07, 2022 Intro to Wood Turning on a Lathe with Chip
Wednesday, April 06, 2022 Techno Titan CNC Router Safety Certification with Pat
Tuesday, April 05, 2022 Sewing Basics with Rebecca
Tuesday, April 05, 2022 TIG Welding Basics with Sabrina
Sunday, April 03, 2022 Woodworking Basics: Make A Project with Powertools
Friday, April 01, 2022 Introduction to Blacksmithing with Mike
Wednesday, March 30, 2022 Intro to MIG Welding with Sabrina
Wednesday, March 30, 2022 Intermediate Welding with Sabrina (Custom Curriculum)
Tuesday, March 29, 2022 TIG Welding Basics with Sabrina
Thursday, March 24, 2022 Make An Edge Grain Cutting Board with Alexis
Wednesday, March 23, 2022 Laser Basics with Pat
Wednesday, March 23, 2022 Intro to MIG Welding with Sabrina
Wednesday, March 23, 2022 Siemens NX II: Intermediate Parametric CAD
Tuesday, March 22, 2022 TIG Welding Basics with Sabrina
Friday, March 18, 2022 Introduction to CNC Milling with Austin
Wednesday, March 16, 2022 Siemens NX Basics: Intro to Parametric CAD
Tuesday, March 15, 2022 Open Sew with Rebecca
Tuesday, March 15, 2022 Additive Manufacturing - Prusa i3 MK3S with John Harris
Sunday, March 13, 2022 Intro to Wood Turning on a Lathe with Chip
Thursday, March 10, 2022 Woodworking Basics: Make A Project with Powertools
Wednesday, March 09, 2022 Techno Titan CNC Router Safety Certification with Pat
Tuesday, March 08, 2022 Open Sew with Rebecca
Sunday, February 27, 2022 Woodworking Basics: Make A Project with Powertools
Sunday, February 27, 2022 CNC Plasma Cutting Basics with Mike
Wednesday, February 23, 2022 Laser Basics with Pat
Wednesday, February 23, 2022 Intro to MIG Welding with Sabrina
Tuesday, February 22, 2022 TIG Welding Basics with Sabrina
Tuesday, February 22, 2022 Additive Manufacturing - Prusa i3 MK3S with John Harris
Sunday, February 20, 2022 Intro to Wood Turning on a Lathe with Chip
Friday, February 18, 2022 Introduction to Blacksmithing with Mike
Wednesday, February 16, 2022 Intro to MIG Welding with Sabrina
Tuesday, February 15, 2022 Open Sew with Rebecca
Tuesday, February 15, 2022 TIG Welding Basics with Sabrina
Sunday, February 13, 2022 Intro to Wood Turning on a Lathe with Chip
Saturday, February 12, 2022 CNC Plasma Cutting Basics with Paul
Saturday, February 12, 2022 VCarve Basics: Design for Techno Titan CNC with Pat Carroll
Thursday, February 10, 2022 Woodworking Basics: Make A Project with Powertools
Wednesday, February 09, 2022 Techno Titan CNC Router Safety Certification with Pat
Wednesday, February 09, 2022 Intro to MIG Welding with Sabrina
Tuesday, February 08, 2022 Open Sew with Rebecca
Tuesday, February 08, 2022 TIG Welding Basics with Sabrina
Wednesday, February 02, 2022 Intro to MIG Welding with Sabrina
Wednesday, February 02, 2022 Siemens NX Basics: Intro to 3D Design
Tuesday, February 01, 2022 TIG Welding Basics with Sabrina
Thursday, January 27, 2022 Make An Edge Grain Cutting Board with Alexis
Wednesday, January 26, 2022 Laser Basics with Pat
Wednesday, January 26, 2022 Intro to MIG Welding with Sabrina
Tuesday, January 25, 2022 TIG Welding Basics with Sabrina
Saturday, January 22, 2022 TIG Welding Basics with Sabrina
Thursday, January 20, 2022 Intro to Wood Turning on a Lathe with Chip
Thursday, January 20, 2022 CNC Plasma Cutting Basics with Mike
Wednesday, January 19, 2022 Intro to MIG Welding with Sabrina
Tuesday, January 18, 2022 TIG Welding Basics with Sabrina
Tuesday, January 18, 2022 Additive Manufacturing - Prusa i3 MK3S with John Harris
Wednesday, January 12, 2022 Intro to MIG Welding with Sabrina
Tuesday, January 11, 2022 TIG Welding Basics with Sabrina
Wednesday, January 05, 2022 Intro to MIG Welding with Sabrina
Wednesday, December 29, 2021 Intro to MIG Welding with Sabrina
Tuesday, December 28, 2021 TIG Welding Basics with Sabrina
Wednesday, December 22, 2021 Intro to MIG Welding with Sabrina
Tuesday, December 21, 2021 TIG Welding Basics with Sabrina
Saturday, December 18, 2021 Intro to MIG Welding with Sabrina
Friday, December 17, 2021 Make An Edge Grain Cutting Board with Alexis
Wednesday, December 15, 2021 Intro to MIG Welding with Sabrina
Tuesday, December 14, 2021 TIG Welding Basics with Sabrina
Tuesday, December 14, 2021 Additive Manufacturing - Prusa i3 MK3S with John Harris
Wednesday, December 08, 2021 Intro to MIG Welding with Sabrina
Wednesday, December 01, 2021 Intro to MIG Welding with Sabrina
Tuesday, November 30, 2021 TIG Welding Basics with Sabrina
Saturday, November 27, 2021 Intro to MIG Welding with Sabrina
Tuesday, November 23, 2021 Woodworking Basics: Make A Fall Project
Wednesday, November 17, 2021 Techno Titan CNC Router Safety Certification with Pat Carroll
Wednesday, November 17, 2021 Intro to MIG Welding with Sabrina
Tuesday, November 16, 2021 TIG Welding Basics with Sabrina
Tuesday, November 16, 2021 Additive Manufacturing - Prusa i3 MK3S with John Harris
Thursday, November 11, 2021 CNC Plasma Cutting Basics
Wednesday, November 10, 2021 VCarve Basics: Design for Techno Titan CNC with Pat Carroll
Wednesday, November 10, 2021 Intro to MIG Welding with Sabrina
Tuesday, November 09, 2021 TIG Welding Basics with Sabrina
Saturday, November 06, 2021 Laser Basics with Pat Carroll
Wednesday, November 03, 2021 Intro to MIG Welding with Sabrina
Wednesday, October 27, 2021 Intro to MIG Welding with Sabrina
Tuesday, October 26, 2021 TIG Welding Basics with Sabrina
Thursday, October 21, 2021 CNC Plasma Cutting Basics
Thursday, October 21, 2021 Techno Titan CNC Router Safety Certification with Pat Carroll
Tuesday, October 19, 2021 TIG Welding Basics with Sabrina
Tuesday, October 19, 2021 Additive Manufacturing - Prusa i3 MK3S with John Harris
Friday, October 15, 2021 Introduction to CNC Milling with Austin (Trinity Students only)
Thursday, October 14, 2021 Origami for Makers Meetup with Ben
Wednesday, October 13, 2021 Introduction to CNC Milling with Austin
Wednesday, October 13, 2021 Intro to MIG Welding with Sabrina
Tuesday, October 12, 2021 TIG Welding Basics with Sabrina
Wednesday, October 06, 2021 Intro to MIG Welding with Sabrina
Tuesday, October 05, 2021 TIG Welding Basics with Sabrina
Thursday, September 30, 2021 Intro to Wood Turning on a Lathe with Chip
Wednesday, September 29, 2021 Intro to MIG Welding with Sabrina
Tuesday, September 28, 2021 Sewing Basics with Rebecca
Tuesday, September 28, 2021 TIG Welding Basics with Sabrina
Sunday, September 26, 2021 Woodworking Basics: Make A Fall Project
Wednesday, September 22, 2021 Laser Basics with Pat Carroll
Wednesday, September 22, 2021 Intro to MIG Welding with Sabrina
Tuesday, September 21, 2021 TIG Welding Basics with Sabrina
Tuesday, September 21, 2021 Additive Manufacturing - Prusa i3 MK3S with John Harris
Thursday, September 16, 2021 Intro to Wood Turning on a Lathe with Chip
Wednesday, September 15, 2021 Intro to MIG Welding with Sabrina
Tuesday, September 14, 2021 Sewing Meetup with Rebecca
Tuesday, September 14, 2021 TIG Welding Basics with Sabrina
Wednesday, September 08, 2021 Introduction to CNC Milling with Austin
Wednesday, September 08, 2021 Intro to MIG Welding with Sabrina
Tuesday, September 07, 2021 TIG Welding Basics with Sabrina
Thursday, September 02, 2021 Woodworking Basics: Make A Fall Project
Wednesday, September 01, 2021 Intro to MIG Welding with Sabrina
Tuesday, August 31, 2021 Sewing Meetup with Rebecca
Tuesday, August 31, 2021 TIG Welding Basics with Sabrina
Thursday, August 26, 2021 Siemens NX Basics: Intro to 3D Design
Wednesday, August 25, 2021 Laser Basics with Pat Carroll
Wednesday, August 25, 2021 Intro to MIG Welding with Sabrina
Tuesday, August 24, 2021 Sewing Basics with Rebecca
Tuesday, August 24, 2021 TIG Welding Basics with Sabrina
Wednesday, August 18, 2021 Techno Titan CNC Router Safety Certification with Pat Carroll
Wednesday, August 18, 2021 Intro to MIG Welding with Sabrina
Tuesday, August 17, 2021 Sewing Meetup with Rebecca
Tuesday, August 17, 2021 TIG Welding Basics with Sabrina
Tuesday, August 17, 2021 Additive Manufacturing - Prusa i3 MK3S with John Harris
Sunday, August 15, 2021 Woodworking Basics: Make A Summer Project
Thursday, August 12, 2021 CNC Plasma Cutting Basics
Wednesday, August 11, 2021 VCarve Basics: Design for Techno Titan CNC with Pat Carroll
Wednesday, August 11, 2021 Intro to MIG Welding with Sabrina
Tuesday, August 10, 2021 Sewing Meetup with Rebecca
Saturday, August 07, 2021 Laser Basics with Pat Carroll
Wednesday, August 04, 2021 Intro to MIG Welding with Sabrina
Tuesday, August 03, 2021 Siemens NX Basics: Intro to 3D Design
Tuesday, August 03, 2021 Additive Manufacturing - Prusa i3 MK3S with John Harris
Thursday, July 29, 2021 Woodworking Basics: Make A Summer Project
Wednesday, July 28, 2021 Laser Basics with Pat Carroll
Wednesday, July 28, 2021 Intro to MIG Welding with Sabrina
Tuesday, July 27, 2021 Sewing Basics with Rebecca
Tuesday, July 27, 2021 TIG Welding Basics with Sabrina
Friday, July 23, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, July 23, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, July 21, 2021 Techno Titan CNC Router Safety Certification with Pat Carroll
Wednesday, July 21, 2021 Intermediate Welding with Sabrina (One-On-One Session)
Tuesday, July 20, 2021 Sewing Meetup with Rebecca
Tuesday, July 20, 2021 TIG Welding Basics with Sabrina
Tuesday, July 20, 2021 Intermediate Welding with Sabrina (One-On-One Session)
Tuesday, July 20, 2021 Additive Manufacturing - Prusa i3 MK3S with John Harris
Sunday, July 18, 2021 Woodworking Basics: Make A Summer Project
Thursday, July 15, 2021 Intro to Wood Turning on a Lathe with Chip
Wednesday, July 14, 2021 VCarve Basics: Design for Techno Titan CNC with Pat Carroll
Wednesday, July 14, 2021 Intermediate Welding with Sabrina (One-On-One Session)
Tuesday, July 13, 2021 Sewing Meetup with Rebecca
Tuesday, July 13, 2021 TIG Welding Basics with Sabrina
Thursday, July 08, 2021 Woodworking Basics: Make A Summer Project
Thursday, July 08, 2021 CNC Plasma Cutting Basics
Tuesday, July 06, 2021 TIG Welding Basics with Sabrina
Wednesday, June 30, 2021 Woodworking Basics: Make A Summer Project
Wednesday, June 30, 2021 Laser Basics with Pat Carroll
Wednesday, June 30, 2021 Intro to MIG Welding with Sabrina
Tuesday, June 29, 2021 Intermediate TIG Welding with Sabrina
Friday, June 25, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, June 25, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, June 23, 2021 Intro to MIG Welding with Sabrina
Tuesday, June 22, 2021 Intro to Wood Turning on a Lathe with Chip
Tuesday, June 22, 2021 Sewing Meetup with Rebecca
Tuesday, June 22, 2021 TIG Welding Basics with Sabrina
Thursday, June 17, 2021 Woodworking Basics: Make A Summer Project
Wednesday, June 16, 2021 Intermediate MIG Welding with Sabrina
Tuesday, June 15, 2021 Sewing Meetup with Rebecca
Tuesday, June 15, 2021 Intro to Wood Turning on a Lathe with Chip
Tuesday, June 15, 2021 TIG Welding Basics with Sabrina
Wednesday, June 09, 2021 Intro to MIG Welding with Sabrina
Tuesday, June 08, 2021 TIG Welding Basics with Sabrina
Wednesday, June 02, 2021 Introduction to CNC Milling with Austin
Wednesday, June 02, 2021 Intro to MIG Welding with Sabrina
Tuesday, June 01, 2021 Sewing Basics with Rebecca
Tuesday, June 01, 2021 Intermediate MIG Welding with Sabrina
Friday, May 28, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, May 28, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Tuesday, May 25, 2021 Sewing Meetup with Rebecca
Tuesday, May 25, 2021 TIG Welding Basics with Sabrina
Thursday, May 20, 2021 CNC Plasma Cutting Basics
Wednesday, May 19, 2021 Intro to MIG Welding with Sabrina
Tuesday, May 18, 2021 TIG Welding Basics with Sabrina
Friday, May 14, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, May 14, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, May 12, 2021 Intro to MIG Welding with Sabrina
Tuesday, May 11, 2021 Sewing Meetup with Rebecca
Tuesday, May 11, 2021 TIG Welding Basics with Sabrina
Wednesday, May 05, 2021 Intro to MIG Welding with Sabrina
Tuesday, May 04, 2021 TIG Welding Basics with Sabrina
Friday, April 30, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, April 30, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Friday, April 30, 2021 Introduction to CNC Milling with Austin
Thursday, April 29, 2021 Woodworking Basics: Make A Spring Project
Thursday, April 29, 2021 CNC Plasma Cutting Basics
Wednesday, April 28, 2021 Laser Basics with Pat Carroll
Wednesday, April 28, 2021 Intro to MIG Welding with Sabrina
Tuesday, April 27, 2021 TIG Welding Basics with Sabrina
Sunday, April 25, 2021 Intro to Wood Turning on a Lathe with Chip
Tuesday, April 20, 2021 Sewing Meetup with Rebecca
Tuesday, April 20, 2021 Intermediate TIG Welding: DIY FIRE PIT!
Sunday, April 18, 2021 Woodworking Basics: Make A Spring Project
Thursday, April 15, 2021 Intro to Wood Turning on a Lathe with Chip
Wednesday, April 14, 2021 Intro to MIG Welding with Sabrina
Tuesday, April 13, 2021 Sewing Meetup with Rebecca
Tuesday, April 13, 2021 TIG Welding Basics with Sabrina
Friday, April 09, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, April 07, 2021 Intermediate MIG Welding with Sabrina
Saturday, April 03, 2021 Laser Basics with Pat Carroll
Friday, April 02, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, March 31, 2021 Intro to MIG Welding with Sabrina
Tuesday, March 30, 2021 TIG Welding Basics with Sabrina
Sunday, March 28, 2021 Intro to Wood Turning on a Lathe with Chip
Friday, March 26, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, March 26, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, March 24, 2021 Laser Basics with Pat Carroll
Wednesday, March 24, 2021 Intermediate MIG Welding with Sabrina
Tuesday, March 23, 2021 Intermediate TIG Welding with Sabrina
Friday, March 19, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, March 19, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Thursday, March 18, 2021 Intro to Wood Turning on a Lathe with Chip
Wednesday, March 17, 2021 Intro to MIG Welding with Sabrina
Tuesday, March 16, 2021 TIG Welding Basics with Sabrina
Friday, March 12, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, March 12, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Tuesday, March 09, 2021 Sewing Meetup with Rebecca
Saturday, March 06, 2021 Laser Basics with Pat Carroll
Friday, March 05, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, March 05, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, March 03, 2021 Intro to MIG Welding with Sabrina
Tuesday, March 02, 2021 TIG Welding Basics with Sabrina
Friday, February 26, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, February 26, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, February 24, 2021 Laser Basics with Pat Carroll
Wednesday, February 24, 2021 Intermediate MIG Welding with Sabrina
Tuesday, February 23, 2021 Intermediate TIG Welding with Sabrina
Wednesday, February 17, 2021 Laser Basics with Pat Carroll
Wednesday, February 17, 2021 Intro to MIG Welding with Sabrina
Tuesday, February 16, 2021 Sewing Meetup with Rebecca
Tuesday, February 16, 2021 TIG Welding Basics with Sabrina
Friday, February 12, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, February 12, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Thursday, February 11, 2021 Intermediate TIG Welding with Sabrina
Wednesday, February 10, 2021 Laser Basics with Pat Carroll
Friday, February 05, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, February 05, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Wednesday, February 03, 2021 Intro to MIG Welding with Sabrina
Tuesday, February 02, 2021 TIG Welding Basics with Sabrina
Sunday, January 31, 2021 Intro to Wood Turning on a Lathe with Chip
Friday, January 29, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, January 29, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Thursday, January 28, 2021 TIG Welding Basics with Sabrina
Wednesday, January 27, 2021 Laser Basics with Pat Carroll
Wednesday, January 27, 2021 Intermediate MIG Welding with Sabrina
Friday, January 22, 2021 Blacksmithing Demo & Assist with Paris (Session 2)
Friday, January 22, 2021 Blacksmithing Demo & Assist with Paris (Session 1)
Thursday, January 21, 2021 Intro to Wood Turning on a Lathe with Chip
Wednesday, January 20, 2021 Intro to MIG Welding with Sabrina
Tuesday, January 19, 2021 Sewing Meetup with Rebecca
Tuesday, January 19, 2021 Intermediate TIG Welding with Sabrina
Wednesday, January 13, 2021 Intermediate MIG Welding with Sabrina
Tuesday, January 12, 2021 Sewing Meetup
Tuesday, January 12, 2021 TIG Welding Basics with Sabrina
Wednesday, January 06, 2021 Intro to MIG Welding with Sabrina
Tuesday, January 05, 2021 Sewing Meetup
Tuesday, January 05, 2021 TIG Welding Basics with Sabrina
Tuesday, December 29, 2020 TIG Welding Basics with Sabrina
Tuesday, December 22, 2020 Sewing Meetup
Tuesday, December 22, 2020 TIG Welding Basics with Sabrina
Friday, December 18, 2020 Intro to MIG Welding with Sabrina
Tuesday, December 15, 2020 Sewing Meetup
Tuesday, December 15, 2020 TIG Welding Basics with Sabrina
Friday, December 11, 2020 Intermediate MIG Welding with Sabrina
Tuesday, December 08, 2020 Sewing Meetup
Tuesday, December 08, 2020 TIG Welding Basics with Sabrina
Friday, December 04, 2020 Intro to MIG Welding with Sabrina
Saturday, November 28, 2020 Laser Basics with Pat Carroll
Friday, November 27, 2020 Intro to MIG Welding with Sabrina
Tuesday, November 24, 2020 Sewing Meetup
Friday, November 20, 2020 Intermediate MIG Welding with Sabrina
Thursday, November 19, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 2)
Thursday, November 19, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 1)
Wednesday, November 18, 2020 CNC Plasma Cutting Basics
Tuesday, November 17, 2020 Sewing Meetup
Friday, November 13, 2020 Intro to MIG Welding with Sabrina
Thursday, November 12, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 2)
Thursday, November 12, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 1)
Wednesday, November 04, 2020 SOLIDWORKS® Basics with Cristina
Wednesday, November 04, 2020 CNC Plasma Cutting Basics
Friday, October 30, 2020 Intermediate MIG Welding with Sabrina
Wednesday, October 28, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 2)
Wednesday, October 28, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 1)
Tuesday, October 27, 2020 Sewing Meetup
Saturday, October 24, 2020 Member Field Trip to Parkerville Wood Products in Manchester
Friday, October 23, 2020 Intro to MIG Welding with Sabrina
Wednesday, October 21, 2020 CNC Plasma Cutting Basics
Tuesday, October 20, 2020 Sewing Meetup
Saturday, October 17, 2020 Techno Titan CNC Router Safety Certification with Pat Carroll
Wednesday, October 14, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 2)
Wednesday, October 14, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 1)
Tuesday, October 13, 2020 Sewing Meetup - Scare Up Some Halloween Fun!
Monday, October 12, 2020 Intro to Mastercam with Rick Lawton
Friday, October 09, 2020 Intermediate MIG Welding with Sabrina
Wednesday, October 07, 2020 CNC Plasma Cutting Basics
Tuesday, October 06, 2020 TIG Welding Basics with Sabrina
Friday, October 02, 2020 Intro to MIG Welding with Sabrina
Wednesday, September 30, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 2)
Wednesday, September 30, 2020 Intro to Wood Turning on a Lathe with Chip
Wednesday, September 30, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 1)
Saturday, September 26, 2020 CNC Plasma Cutting Basics
Friday, September 25, 2020 Intermediate MIG Welding with Sabrina
Wednesday, September 23, 2020 CNC Plasma Cutting Basics
Tuesday, September 22, 2020 Sewing Meetup
Friday, September 18, 2020 Intro to MIG Welding with Sabrina
Thursday, September 17, 2020 Laser Basics with Pat Carroll
Wednesday, September 16, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 2)
Wednesday, September 16, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 1)
Wednesday, September 16, 2020 CNC Plasma Cutting Basics
Tuesday, September 15, 2020 Sewing Meetup
Friday, September 11, 2020 Intro to MIG Welding with Sabrina
Wednesday, September 09, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 2)
Wednesday, September 09, 2020 Blacksmithing Demo & Assist with Paul Spirito (Session 1)
Wednesday, September 09, 2020 CNC Plasma Cutting Basics
Tuesday, September 08, 2020 Sewing Meetup
Saturday, September 05, 2020 Laser Basics with Pat Carroll
Friday, September 04, 2020 Intro to MIG Welding with Sabrina
Friday, August 28, 2020 Intro to MIG Welding
Saturday, August 22, 2020 Intro to MIG Welding with Sabrina
Friday, August 21, 2020 Intro to MIG Welding with Sabrina
Thursday, August 20, 2020 Laser Basics with Pat Carroll
Wednesday, August 12, 2020 *SOLD OUT* Blacksmithing One-On-One with Paul Spirito (Session 2)
Wednesday, August 12, 2020 *SOLD OUT* Blacksmithing One-On-One with Paul Spirito (Session 1)
Wednesday, August 05, 2020 *SOLD OUT* Blacksmithing One-On-One with Paul Spirito (Session 3)
Wednesday, August 05, 2020 *SOLD OUT* Blacksmithing One-On-One with Paul Spirito (Session 2)
Wednesday, July 29, 2020 *SOLD OUT* Blacksmithing One-On-One with Paul Spirito (Session 3)
Wednesday, July 29, 2020 *SOLD OUT* Blacksmithing One-On-One with Paul Spirito (Session 2)
Wednesday, July 29, 2020 *SOLD OUT* Blacksmithing One-On-One with Paul Spirito (Session 1)

Upcoming Workshops (Virtual)

  • No upcoming events

Please click here to review our cancellation policy.

HEALTH & SAFETY: Our facility is mask-optional as of Friday, April 1, 2022. Please click here for more info.

MakerspaceCT is a program of McEivr, Inc., a 501(c)3 nonprofit. Please Donate Now To Help Support Our Mission.

Location: 36 Talcott Street, Hartford, CT 06103

Phone: 860-619-MAKE.  Email: info@makerspacect.com

Follow Us On Social Media:


Powered by Wild Apricot Membership Software